DEVELOPMENT AND CHARACTERIZATION OF EARTH-BASED COMPOSITES WITH RICE HUSK IMPREGNATED WITH BIO-BASED PHASE CHANGE MATERIAL FOR RENDERING MORTARS AND HOLLOW BLOCKS
DEVELOPMENT AND CHARACTERIZATION OF EARTH-BASED COMPOSITES WITH RICE HUSK IMPREGNATED WITH BIO-BASED PHASE CHANGE MATERIAL FOR RENDERING MORTARS AND HOLLOW BLOCKS
Autor
Lucas Caon Menegatti
Abstract
This study investigates the use of a bio-based Phase Change Material (PCM), with a phase change temperature of 29 °C, incorporated into Rice Husk (RH) bio-aggregates in earth-cement-based composites for building envelope elements. The objective is to evaluate the thermal, physical and mechanical behavior of composites produced with RH impregnated with PCM. The shape-stabilization process, performed without vacuum, allowed RH to absorb PCM equivalent to 102% of its dry mass, resulting in RH-PCM particles with water absorption 65% lower than raw RH. Composites were developed with 8% bio-aggregates for rendering mortars and 40% for hollow blocks. The partial filling of RH pores by PCM governed the changes in density, water absorption and mechanical performance. In rendering mortars, RH-PCM recovered the flexural strength loss caused by raw RH and preserved the crack-control effect of the bio-aggregate. In hollow blocks,RH-PCM reduced water absorption from 28.8% to 8.7% and increased compressive strength from 1.04 to 2.04 MPa, meeting the reference requirement for hollow soil-cement blocks. In a laboratory heated-chamber test, the 40-RH-PCM block reduced the maximum internal surface temperature by 3.6 °C and delayed the time to reach 30 °C by 68 minutes compared with the concrete block. In rendered systems, the 40-RH-PCM block core delayed this threshold by 108 minutes. Cradle-to-gate LCA showed that RH biogenic carbon offset part of the PCM production impact, and the break-even analysis indicated that only 1.28 kWh/(m²·year) would be required in the most demanding scenario to compensate additional production emissions. The results indicate that RH-PCM earth-based composites are a promising alternative for building envelope elements with improved thermal response and potential reductions in carbon emissions.